![]() ![]()
These 2D components are visible only in hidden line rendered viewports set to a 3D view in orthogonal projection.įor objects such as plumbing fixtures, cabinets, and furniture that are typically shown uncut in section viewports even when they intersect the cut plane, you can set how the symbol should display when it passes through the cut plane: as if cut by the cut plane, or as if either below/beyond or above/before the cut plane. You can generate as many as six 2D components for the viewport views normal to (perpendicular to) the symbol definition faces (top, bottom, front, back, left, and right) and as many as three section views (top/bottom cut, front/back cut, and left/right cut) for use in section viewports. In Top/Plan view, align the 2D and 3D objects symbol alignment can be adjusted after creation with the Edit Symbol command.Īdditional 2D components for use in a hidden line rendered viewport can be generated from the symbol definition’s 3D component see Creating 2D components for symbol definitions and plug-in objects. To create a hybrid symbol, select both the 2D and 3D objects, which become the 2D and 3D components of the symbol. Select the object or objects to convert into a symbol definition. Will you want updates to the symbol definition to change all the instances already existing in the drawing, or will you want to place variations of the symbol into the drawing, that can retain individual settings after placement? The type of symbol definition determines how the instances are updated later. Will you be working in Top/Plan view only, or also in 3D views? Viewports cannot be made into symbols.īefore creating a symbol definition, decide how it will be used.Īs discussed in Concept: Vectorworks symbols, the type of object or objects and the associated plane determine how the symbol instances will display in all views. Symbol definitions can also be created from other symbols, text, existing plug-in objects, and groups. #Vectorworks symbol registration#If there is still no error code, you have entered a registration with too many or too few characters.The Create Symbol command creates symbol definitions from drawing objects. If you do not see the error code, make sure you have updated to the latest version, and have entered your user name. Please follow this link and enter it into the troubleshooting formfollow this link and enter it into the troubleshooting form. #Vectorworks symbol code#If you have tried all these steps, and your registration code still produces an error, there will be a 5 digit code next to the registration field. #Vectorworks symbol serial#In your plug-in registration, nnnn-nnnn-XXXXXX-nnnn, XXXXXX should match the last six characters of your Vectorworks serial number.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |